Attic Insulation Top-Up To R-60
An attic insulation top-up blows fresh cellulose over the layer already in place and lifts the attic to R-60. For a chilly top floor in an older Orléans house, it is the quickest fix there is.
Details and pricesCellulose attic insulation is blown in as loose fill and settles into a dense, even layer across the whole attic floor. It reaches the low corners at the eaves where batts often stop short.
Cellulose is made mostly from recycled paper treated with borate for fire and pest resistance. It is the material we use most in Orléans attics.
A batt is cut to length, and each cut leaves an edge that air can slip past. Wires, trusses and vent pipes make tidy cuts nearly impossible, so older batt attics tend to leak at every seam.
Cellulose attic insulation flows around those obstacles. It also slows air moving through the layer itself, which helps on windy winter nights.
The blowing machine stays outside or in the garage, and a single hose runs to the attic hatch. Inside the house, the only thing you see is the covered path from the door to the hatch.
We blow from the far corners back toward the hatch, check the depth against markers, and leave the hatch weatherstripped and insulated.
Loose cellulose settles a little in its first months. We blow it to the installed depth that gives your target R-value after settling, so an R-60 attic stays at R-60.
Ask us about an attic insulation top-up if your attic already has an older layer we can build on.
For an empty or nearly empty attic, cellulose attic insulation usually runs $1.75 to $3 per square foot at Ontario market rates. Adding cellulose attic insulation over an existing layer costs less, and your written quote gives the firm number.
Phone (343) 301-5501 to have cellulose attic insulation priced for your home, or head back to the home page to compare our other attic work.
Two of these often go together in Orléans, such as sealing the ceiling and then topping it up.
An attic insulation top-up blows fresh cellulose over the layer already in place and lifts the attic to R-60. For a chilly top floor in an older Orléans house, it is the quickest fix there is.
Details and prices
Attic insulation removal pulls out old fill that is flattened, dirty or damaged, so the attic can be sealed and refilled properly. It leaves through a sealed vacuum hose and goes away in bags.
Details and prices
Attic air sealing plugs the openings between your living space and the attic above. Heated air rises out through pot lights, wire holes, vent stacks and the hatch, carrying moisture along with it.
Details and prices
Ice dams start when warmth leaking out of the house softens roof snow from underneath and the water freezes again at the cold overhang. Ice dams then hold back more meltwater, which can creep under the shingles and stain the ceiling.
Details and prices
Wet attic insulation holds little heat, and left damp it can feed mould on the roof boards. We find out where the water came from, take out the damaged material, and reinsulate once the wood is dry.
Details and prices
Vermiculite insulation is a light, pebbly loose fill in silver-gold to grey-brown. Some vermiculite insulation sold in Canada before 1990, including the Zonolite brand, came from a mine with natural asbestos in it. Not all of it contains asbestos, and nobody can tell by looking.
Details and prices
The Ontario attic insulation rebate comes from the Home Renovation Savings program, run across the province by Save on Energy together with Enbridge Gas. Its attic-only stream pays up to $1,250 once a thin attic is brought to R-50, and it does not ask for a home energy assessment first.
Details and prices
Two numbers drive attic insulation cost: how many square feet the attic floor covers and how many inches it needs. You get the going rate when you call and a firm written price after the free check.
Details and pricesGive us the size of the house and what you have noticed, and we will phone to pick a visit time.
A few details about your home and your attic let us give you a closer price range on the first call. Calls go to +1 (343) 301-5501.